Open ESP32 hardware, open sensor firmware

FairGrow runs on affordable, widely available ESP32 hardware and standard Zigbee sensors. We invest in better firmware every week, and the source code of our ESP-NOW sensors comes with it, at no extra cost. No lock-in: your sensors are standard and your data stays yours.

ESP-NOW sensors ESP-NOW sensor source code included Continuously improved
ESP-NOW
Open sensor firmware
MIT licence
Source code of the ESP-NOW sensors
No extra cost
For every paying subscriber
Always
New sensors in the pipeline
Open hardware

Standard ESP32, standard sensors

FairGrow is built on the ESP32 family, the same low-cost, widely stocked microcontrollers that power millions of connected devices worldwide. Our ESP-NOW sensors carry readings back from the far corners where no cable reaches, and alongside them you use standard Zigbee sensors from many brands. It is standard silicon and standard Zigbee, so you can buy replacements anywhere and you are never tied to one supplier.

Open sensor firmware

The ESP-NOW sensor firmware is open

Every paying subscriber can download the complete source code of our ESP-NOW sensors straight from our website, at no extra cost and under the MIT licence. Flash it yourself, check exactly what your ESP-NOW sensors do, or adapt the code to a sensor we have not covered yet. That way you always know what runs on your ESP-NOW sensors.

Download and flash

Pull the source code of the ESP-NOW sensors from your account and flash it to your own ESP-NOW sensors whenever you like.

Check every line of your ESP-NOW sensors

See exactly what your ESP-NOW sensors measure, store and send, with full insight into the code that runs on them.

Adapt to your crop

Add a sensor we have not covered yet, or tune the logic to your setup. The MIT licence allows it. Or tell us, and we will likely add it to the main firmware for everyone.

Always moving

Always getting smarter

We work on FairGrow every week. New sensors join the supported list, and firmware updates make the ones you already own sharper: better battery life, a more reliable mesh, smarter logic running right on the device. You get those improvements as they land, without buying new hardware.

New sensors, regularly

The supported list keeps growing, from soil and climate to light and flow, with new hardware options arriving as we test and validate them.

Smarter firmware, same devices

Updates sharpen the hardware you already own: cleaner readings, longer battery life and more decision logic running on the device itself.

Over-the-air updates

Improvements reach your devices in the field without a site visit, so your network stays current with no effort on your part.

Tested on our own devices first

Every change runs on our own hardware in real soil and real weather before it reaches you, not just on a lab bench. Growers who want new firmware early can join the first round of field testing.

The point of it all

Less thinking in the field

The goal is simple: a grower should spend time growing, not configuring. As the firmware gets smarter, more of the routine decisions move onto the device itself.

It reads the soil, weighs up the weather and tells you plainly: water now, wait or hold off. So you can walk your rows and trust the system to have your back.

FAQ

ESP32 and firmware, answered

Which ESP32 devices does FairGrow support?

ESP32-based ESP-NOW sensors for hard-to-reach spots, with standard Zigbee sensors alongside them.

Do I really get the firmware source code?

Yes, for our ESP-NOW sensors. Every paying subscriber can download the complete source code at no extra cost, under the MIT licence.

Do I need to be a programmer?

No. Everything works out of the box. The source code is there if you want it, but you don’t need it.

Can I add a sensor you do not support yet?

Yes, on the ESP-NOW sensors that is exactly what the open firmware is for. Or tell us, and we will likely add it. See standard sensors, no lock-in.

How often do you release updates?

Continuously. New sensors and firmware improvements land regularly and reach your existing devices without new hardware.

Why isn’t the Zigbee coordinator firmware open?

The Zigbee coordinator is the heart of your network: it manages the pairing and security of all your sensors and handles the updates. We stand behind it, and we can only deliver on that if we manage that firmware ourselves. You are never locked in: your sensors are standard Zigbee and also work with other coordinators, and your data stays yours.

Your hardware, your data

Tell us about your site and we will set up a no-obligation pilot, with the source code of the ESP-NOW sensors included. See what open ESP32 hardware and open sensor firmware are like in the field.

Keep exploring

Related guides

MIT licence: what you may do with our sensor firmwareWhat the MIT licence means for the source code of our ESP-NOW sensors: you may use,Read the guide →ESP-NOW sensors for fields without power or wifiA satellite out in the field runs on battery or solar, needs no wifi and noRead the guide →Standard sensors, no vendor lock-inFairGrow works with standard Zigbee sensors you can buy anywhere. Compare the cost with closed weatherRead the guide →What is Zigbee?Zigbee has been around for years and is used worldwide. We chose it deliberately, because itRead the guide →Who owns your sensor data?Your data belongs to you, from the first reading to the last report.Read the guide →We build our own drone softwareBehind the platform sit three dedicated processing services that we built and run ourselves: one plansRead the guide →

Browse the full knowledge base →

✓

Thank you!

We've received your request and will be in touch soon.

➤ Personal contact within 1 business day

➤ A proposal tailored to your situation